For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers
sort ascending
Control of expansive soil desiccation cracks via helical auxetic yarn November 2023
Passive radiative personal heating by woven fabrics containing aluminum particles January 2023
DESIGN AND INVESTIGATION THE OPERATION OF TEXTILE BASED ELECTRODES FOR ELECTROTHERAPY Winter 2023
effect of tensile fatigue cyclic loaing on performance of textile based strain sensors Winter 2023
Fabrication and Characterization of Polypropylene/Aluminum Fibers for Wearable Applications in the Infrared Region July 2023
Investigation of fetal ECG signal using textile-based electrodes November 2022
Mechanical Properties of a Novel Tri-Component High Stiff Auxetic Reinforced Composite Structure November 2022
Lightweight and Highly Flexible Metal Deposited Composite Fabrics for High-performance Electromagnetic Interference Shielding at Gigahertz Frequency March 2022
Effects of the Biomechanical Design of the Full Body Swimsuit on its Tensile Behavior in the Shoulder Area March 2020
Intensification of auxetic effect in high stiffness auxetic yarns with potential application as the reinforcing element of composite December 2020
23. M.A. Dorostkar, F.Shoukohi, M.Shanbeh,A.Torkan,"Super Wideband Textile Fractal Antenna for Wireless Body Area Networks", Journal of Electromagnetic Waves and Applications, Accepted for Publication. June 2015
E. Ghorbani, M. Zarrebini, H. Hasani, M. Shanbeh,"Modeling the Moisture and Heat Transfer of Warp Knitted Spacer Fabrics Using Artificial Neural Network Algorithm",Journal of Textiles and light Industrial Science and Technology,"Vol.4,No.1,pp.17-26,2015. June 2015
24. N.Moazzeni, H.Hasani, M.Shanbeh,” Effect of Material and Fabric Parameters on Fatigue Value of Weft Knitted Fabrics”, Indian Journal of Fiber and Textile Research, June,2014. June 2014
20. R. Torfeh Esfahani, M. Shanbeh,” Effect of Navel and Rotor Type on Physical and Mechanical Properties of Viscose Rotor Spun Yarns”, Fibers and textiles in eastern europe, May,2014. May 2014
17. M.Shanbeh, H.Khalili, J.Hajrasooliha, A.Shiasi,”An Experimental Study to Evaluate the Color Properties of Polyester Multifilament Woven Fabrics”, Journal of Engineered Fibers and Fabrics, accepted for publication. July 2014
23. H.Hasani, M.Shanbeh, ”Predicting the hairiness and coefficient of variation of Elastic Core Spun Yarns Produced on Sirofil-Spinning System”,Journal of fashion and textile technology,accepted for publication. April 2014
19. M. Shanbeh, F. Ataee, A. Tabibi ,S. Khanmohammadi,” Application of One-quarter Fractional and Full Factorial Design to Study Set Mark Phenomenon of Multifilament Polyester Fabrics”, Fiber and Polymers Journal, February,2014. February 2014
M.Shanbeh, A.Ataeain, M.Eslami,"Effect of Abrasion Process on Reflectance Factor and Color Change of Chenille Woven Fabrics",International Journal of engineering,Vol. 27, No.8,1317-1324,2014. August 2014
M.Rejali, H.Hassani, M.Shanbeh, S.Ajeli,” Optimization and prediction of the pilling of weft knitted fabrics produced from wool/acrylic blended yarns”, Indian Journal of Fiber and Textile Research, March,2014. March 2014
R.Masaeli, H.Hasani, M.Shanbeh, "Optimizing the Physical Properties of Elastic Woven Fabrics Using Grey-Taguchi Methods",The Journal of the Textile Institute, Accepted for Publication. July 2014
16. Sh.Minapour, S.Ajeli, H.Hassani, M.Shanbeh,” Optimization and Prediction of Curling Behavior of Single Jersey Weft Knitted Fabrics”, The Journal of the Textile Institute, Vol.104, No.5, 550-561-2013. May 2013
18. M.Shanbeh, F.Bayatlou,” Effect of Raw Material on Physical and Mechanical Properties of Boucle Fancy Yarns and Weft Knitted Fabrics”,Journal of Science and Textile Technology, Vol.2,No.3,pp.175-180, In Farsi. January 2013
21. E. Ghorbani , M. Zarrebini Esfahani, H. Hasani, M. Shanbeh,” Comfort Modeling of Warp Knitted Spacer Fabrics Using Artificial Neural Network Algorithm”, Under Review. August 2012
13. A.R.Mogassem,A.R.Fallahpour, M.Shanbeh,“ An Intelligent Model to Predict Breaking Strength of Rotor Spun Yarns Using Gene Expression Programming”, Journal of Engineered Fibers and Fabrics, Vol.7,No.3,pp.,2012. September 2012
14. M.Shanbeh,D.Najafzadeh,S.A.Hoseini Ravandi,” Predicting Pull-out Force of Loop Pile of Woven Terry Fabrics Using Artificial Neural Network Algorithm”, Industria Textila, Vol.63, No.1, pp.37-41, 2012. January 2012
15. M.Shanbeh,H.Hasani,F.Youseffimanesh,”Evaluatin Fatigue Behavior of Core-spun Yarns under Tensile Cyclic Loading”, Journal of Engineered Fibers and Fabrics,Vol.7,No.4,pp.95-103.2012. December 2012
11. M.Shanbeh, M.Ranjbar ,B.Adeli,A.Ataeain,“ Effect of Heat setting on Twist Liveliness and Tensile Properties of Cotton-Covered Polyester Core Spun Yarns”, ـJournal of Science and Textile Technology, Vol.1, No.2,pp.59-64, In Farsi. June 2011
12. M.Shanbeh,B.Baghaei,A.Ataeain,A.Tabibi,“Coating of core part: An alternative method to decrese the strip-back phenomenon of core-spun yarns“, Fibers and Textiles in Eastern Europe,Vol.19,No.5,pp.28-32,2011. October 2011
7. B. Adeli, A.A.Ghareaghaji, M.Shanbeh,“ Structural Evaluation of Elastic Core-Spun Yarns and Fabrics under Tensile Fatigue Loading”, Textile Research Journal, Vo.80,No.1,Issue.2,pp.137-147,2011. January 2011
8. M.Ziaee, M.Shanbeh, S.Borhani,” Evaluation of physical and mechanical properties of cotton covered polypropylene-core yarns and fabrics”, Industria Textila, Vol.62, No.1, pp.9-13, 2011. January 2011
10. M.Shanbeh, H.Hassani, S.A. Tabatabaei,” Modeling and Predicting the Breaking Strength and Mass Irregularity of Cotton Rotor Spun Yarns Containing Cotton Fiber Recovered From Ginning Process Using Artificial Neural Network Algorithm”, Modeling and Si January 2011
5. B.Baghaei,M.shanbeh,A.A.Ghareaghaji,“ Effect of Tensile Fatigue Cyclic Loads on Bagging Deformation of Elastic Woven Fabrics”, Indian Journal of Fiber and Textile Research,Vol.35,December,pp.298-302,2010. December 2010
6. A.R. Moghassem, A.A. Ghareaghaji, S.Shaikhzadeh Najar, M.Palhang, M.Shanbeh,“Application of Artificail Neural Nets in Carpet Thickness Loss Prediction“, World Applied Science Journal, Vol.9,No.2,pp.167-177,2010. February 2010
9. M.Shanbeh, M. Sheikhzade, A. Ataeain, H.Zare,“ Effect of Fiber Fineness on color and Reflectance Value of Dyed Filament Polyester Fabrics after Abrasion Process”, Tekstiltec Journal, Vol.53,No.10-12,pp.285-293,2010. November 2010
4. H.Hasani, M.Shanbeh,“Application of Multiple Linear Regression and Artificial Neural Network Algorithms to predict the Total Handle Value of Summer knitted T-shirts“, Indian Journal of Fiber and Textile Research,Vol.35,September,pp.222-227,2010. September 2010
3. M. Sheikhzadeh, M. Shanbeh, D.Semnani,”Structural Evaluation of Spherical Parachute”, International Journal of Applied Engineering Research,Vol.3,No.6,pp.789-800,2008. June 2008
2. A.A.Gharehaghaji, M.shanbeh, M.Palhang,” Analysis of Two Modeling Methodologies for Predicting the Tensile Properties of Cotton-covered Nylon Core Yarns”, Textile Research Journal, Vol.77, No.8, pp.565-571, 2007. August 2007
1. A.A.Ghareaghaji, M.Palhang, M.Shanbeh,” Using Artificial neural Network Algorithm to Predict the tensile Properties of cotton-covered Nylon Core Yarns”, Esteghlal Journal, Vol.24, No.2, March, pp.241-251, 2006.(In Farsi) March 2006
Conference Papers
sort ascending
J.Mirzaee,M.Zarebini,S.Kalani,M.Shanbeh,"Study on acoustic properties of multifilament polyester fabrics",9th national conference on textile engineering,Tehran,May,2014,(in Farsi). May 2014
F.Minaee,M.Shanbeh,S.Borhani,"Study on thermal and moisture transfer of woven fabrics containing core-spun yarns wirh chrome-nickel wire as core part", 9th national conference on textile engineering,Tehran,May,2014,(in Farsi). May 2014
S.Borhani,M.Shanbeh,M.Seaj,M.Jamshidi," study on cotton covered PAN nano yarn core-spun yarns", 9th national conference on textile engineering,Tehran,May,2014,(in Farsi). May 2014
M.Shanbeh, E.Naem, A.Aghaei,K.Naderi,"Effect of laundering process on electrical properties of woven fabric strain sensors",9th national conference on textile engineering,Tehran,May,2014,(in Farsi). May 2014
F.Asghari, M.Shanbeh,”Effect of process Parameters on Physical and Mechanical Properties of Rotor Spun Yarns and Pilling of Woven Fabrics”, 8th National Conference on Textile Engineering, Yazd,May,1391(In Farsi). May 2012
A.Gheibi,M.Shanbeh,”Effect of Fiber Fineness on Physical and Mechanical Properties of rotor Spun Yarns”,8th National Conference on Textile Engineering. Yazd,May,1391(In Farsi). May 2012
M.Mommayez, M.Shanbeh,” Effect of Process Parameters on Cover Factor of Copper Core-Spun Yarns”, Autex2011 Conference, France, 6-8June, 2011, 1113-1115,2011. June 2011
M.Shanbeh,S.Kalani,M.Namnik,“ A Novel Method to Produce Textile-Based Heating Elements Using Chrome-Nickel Metallic Wires”, Autex2011 Conference, France,6-8June,785-790,2011. June 2011
M. Shanbeh,M.Karimian,F.Ataee,A.Tabibi,” Statistical Evaluation of Set Mark of Filament Woven Fabrics”, 41th International Symposium on Novelties in Textiles,Slovonia, jubljana, 27-29 May,pp.217-221, 2010. May 2010
Z.Tadi, M.Shanbeh,S.Borhani.B.Adeli,“ Investigation on production and properties of core-spun yarns containing Nylon66 Nanofiber Yarn as Core Part”, Fiber Society Conference,Turkey,12-14 May,pp.125-126, 2010. May 2010
3. M.shanbeh, B.Baghaei, N.Soheili Najand,”Effect of Abrasion Process on Bagging Behavior of Cotton Woven Fabrics”, 1st International conference on Textile Engineering , Rasht, Iran, 2009. October 2009
D.Najafzadeh, M.Shanbeh, S.Hoeini, “Evaluating the Pull-Out Force of Pile Yarn in Terry Fabrics by Using Linear Regression”, 1st International conference on Textile Engineering, Rasht, Iran, 2009. May 2009
B.Adeli,A.A.Ghareaghaji,M.Shanbeh,”Evaluation and Modelling of Fatigue Behavior of Elastic Core spun Yarns using Finite Element technique”, 7th National Conference on Textile Engineering,Rasht ,Iran,2009,(In Farsi). May 2009
E.Mosafa, M.shanbeh, S.A.Hoseini, “Effect of weft insertion method of weaving machinery on fabric inequality in Width”, 1st International conference on Textile Engineering, Rasht, Iran, 2009. May 2009
M.Ziaee, M.Shanbeh, S. Borhani,”An Experimantal Study to asses the properties of cotton covered polypropylene yarns”, 7th National Conference on Textile Engineering,Rasht ,Iran,2009,(In Farsi). May 2009
2. H.Hasani, M.Shanbeh, “An Alternative Approach to Predict The Total Handle Value Of Summer Knitted Suits“, 4th Internatonal Textile, Clothing & Design Conference,Croatia,pp.775-780,2008. September 2008
3. M.Shanbeh, A.A.Ghareaghaji, Gh.R.Afkhami, ”The Evaluation of Artificial Neural Network and Multiple Linear Regression Algorithms in Predicting Breaking Strength of Cotton Rotor-Spun Yarns, 6th National Conference on Textile Engineering,Isfahan,Iran,pp. May 2007
2. M.Mohiti Asli, A.A. Ghareaghaji, M.Shanbeh, ”Analysis of Core-spun Yarn Failure”, 6th National Conference on Textile Engineering,Isfahan,Iran,pp.20-21,2007. (In Farsi) May 2007
L.Pouriamehr, S.A. Hosseini, M.Shanbeh, E.Jafari, ”An Experimental Study to Assess the Effect of Fiber Denier on Physical and Mechanical Properties of PET WovenFabrics”,6thNationalConferenceonTextileEngineering,Isfahan,Iran,pp.414-415,2007. (In Farsi) May 2007
M.shanbeh, A.A.Ghareaghaji, M.Palhang, ”Comparison Between Artificial Neural Network Algorithm and Multiple Linear Regression in Predicting the Tensile Properties of Cotton Covered Nylon Core Yarns”, 5th National Conference on Textile Engineering,Tehra May 2005
1. M.Nasiri, M.Shanbeh, H.Tavanaie,”Comparison Statistical Regression, Fuzzy Regression and Neural Network Modeling in Polyester Dying May 2005

تحت نظارت وف ایرانی